MATTE ALLURE™ TPM 205-AA1


BIAXIALLY ORIENTED POLYPROPYLENE (BOPP) / THERMAL LAMINATION FILM – MATTE SCUFF FREE

Product Description

MATTE ALLURE HARD™ TPM 205-AA1 is a scuff resistant matte, two-side treated BOPP film with an extrusion coated bonding surface specifically designed for thermal lamination with offset printed paperboard and cardboard.

Features

  • Excellent matte finish for alluring graphics
  • Resistant to scratches and scuffing
  • Compatible with UV spot finishing
  • Strong lamination bond with paper
  • Suitable for one-side and two-side lamination
  • Excellent matte appearance without shiners

Applications and Conversion

  • Product designed as an overlaminate film for book covers, paper bags, premium cosmetic and beverage boxes
  • The matte surface is compatible with UV spot, Hot Foil and Cold Foil finishing
  • The printed surface should be well dried before lamination
  • For two-side laminations, allow enough time to cool between lamination operations
  • Application-specific testing is recommended for suitability for all coating, printing and laminating processes

Availability

TPM 205-AA1 rolls are wound with adhesive side in; TPM 205-AA2 rolls are wound with adhesive side out Alternative film thicknesses are possible subject to negotiation.

Regulation

MATTE ALURE™ TPM 205 family of films comply with the applicable FDA and European legislation for most applications involving direct food contact. For specific applications please request Coatall’s Declaration of Compliance document.

Storage

Store in a dry (preferably < 50% RH) location at 2°C (35°F) to 27°C (80°F).

    PRODUCT DATASHEET

Product Detail

Property 32 TPM 600-AA1 Test Method
Unit Weight g/m2 27.0 CATM 0000
lb/ream 16.6
Yield m2/kg 37.0 ADTM D 4321
in2/lb 26,040
Gloss 45° % < 10 ASTM D 2457
Treatment Glossy Side mN/m 40 ASTM D 2578
Bonding Side 42
Lamination Temperature Bonding Side °C 100-120 ASTM D 1204
°F 210-250

The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes