REFLECTIONS IPG 800-MS1


BIAXIALLY ORIENTED POLYPROPYLENE (BOPP) / THERMAL LAMINATION FILM – GLOSS METALLIZED

Product Description

REFLECTIONS™ IPG 800-MS1 is a low emissivity metallized BOPP film designed for reflective insulation applications. The metallized surface is extrusion over-coated with a highmelt copolymer bonding layer for thermal lamination with polyethylene (PE) and expanded polystyrene (XPS) foam board or bubble sheet.

Features

  • Excellent adhesion to PE, XPS or polyolefin substrates
  • High surface reflectivity and low emissivity
  • High resistance to corrosion and degradation
  • Excellent radiant and vapor barrier
  • Strong metal adhesion bond strength
  • Ideal for aluminum foil replacement

Applications and Conversion

  • Product designed as an overlaminate film for book covers, paper bags, premium cosmetic and beverage boxes
  • The bonding layer provides excellent adhesion to PE and XPS foam or bubble sheets and polyolefin-based structures
  • Designed for reflective attic and house insulation boards and other reflective barrier insulation applications
  • Application-specific testing is recommended for suitability for subsequent coating, printing and laminating processes

Availability

IPG 800-MS1 rolls are wound with adhesive side in; IPG 800-MS2 rolls are wound with adhesive side out. Alternative film thicknesses are possible subject to negotiation.

Regulation

REFLECTIONS™ IPG 800 family of films comply with For specific applications please request Coatall’s Declaration of Compliance document.

Storage

Store in a dry (preferably < 50% RH) location at 2°C (35°F) to 27°C (80°F).

    PRODUCT DATASHEET

Product Detail

Property 22 IPG 800-MS1 Test Method
Unit Weight g/m2 20.0 CATM 0000
lb/ream 12.3
Yield m2/kg 50 ADTM D 4321
in2/lb 35,135
Treatment Glossy Side mN/m ** ASTM D 2578
Bonding Side 40
COF Dynamic - 0.25 ASTM D 1894
Lamination Temperature Bonding Side °C 100-120 ASTM D 1204
°F 210-250

The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes