SOFT ALLURE™ TPM 600-AA1


BIAXIALLY ORIENTED POLYPROPYLENE (BOPP) / THERMAL LAMINATION FILM – MATTE SILKY

Product Description

SOFT ALLURE™ TPM 600-AA1 is an alluringly soft premium matte OPP film. It is two-side treated with an extrusion coated bonding surface specifically designed for thermal lamination with offset printed paperboard and cardboard

Features

  • Distinctive matte look with alluring softness
  • Compatible with UV spot finishing
  • Strong lamination bond with paper
  • Printable with Offset, UV Offset, and Screen inks
  • Resistant to smudges and scratches
  • Suitable for one-side and two-side laminations

Applications and Conversion

  • Product designed as an overlaminate film for book covers, paper bags, premium cosmetic and beverage boxes
  • Black matte surface is printable with Offset, UV Offset, Screen printing, and can be Hot and Cold Foil stamped
  • The printed surface should be well dried before lamination
  • For two-side laminations, allow enough time to cool between lamination operations
  • Application-specific testing is recommended for suitability for all coating, printing and laminating operations

Availability

TPM 600-AA1 rolls are wound with bonding side in; TPM 600-AA2 rolls are wound with bonding side out.Alternative film thicknesses are possible subject to negotiation.

Regulation

SOFT ALLURE™ TPM 600 family of films comply with the applicable FDA and European legislation for most applications involving direct food contact. For specific applications please request Coatall’s Declaration of Compliance document.

Storage

Store in a dry (preferably < 50% RH) location at 2°C (35°F) to 27°C (80°F).

    PRODUCT DATASHEET

Product Detail

Property 32 TPM 600-AB1 Test Method
Unit Weight g/m2 29.5 CATM 0000
lb/ream 18.1
Yield m2/kg 33.9 ADTM D 4321
in2/lb 23,833
GLOSS 45° % 4.5 ASTM D 2457
Treatment Black Matte Side mN/m 48 ASTM D 2578
Bonding Side 40
Lamination Temperature Bonding Side °C 100-120 ASTM D 1204
°F 210-250

The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes